What is the main ingredient of AdBlue?
There are two major AdBlue ingredients that make up the liquid. AdBlue is a colourless liquid made from a mixture of high-purity urea (32. The solution poses little risk to humans or the environment as it is mostly water-based. AdBlue is composed of 32. Invented in 1828, Urea is a synthetic product derived from ammonia. BASF was the first company to produce urea industrially in 1922.Urea Production: Urea, a key component of AdBlue®, is typically manufactured by synthetically combining ammonia and carbon dioxide. This process involves the reaction of ammonia with carbon dioxide under controlled temperature and pressure conditions.Yes, AdBlue and DEF are chemically identical. Both consist of a 32. SCR systems.Using water instead of AdBlue – In short, you mustn’t use water instead of AdBlue, or water down the AdBlue in anyway. AdBlue is a mixture of urea and 67. Where as tap water contains a lot of minerals and ions that is harmful to the vehicle exhaust treatment system.
What can you put instead of AdBlue?
Even before engine damage occurs, using water instead of AdBlue® will also increase fuel consumption and cause your vehicle to break emissions reduction rules. As such, if you do mistakenly use water instead of AdBlue®, do not start your engine and contact a professional. The AdBlue™ tank will need to be refilled with a minimum of approximately 3-5 litres of AdBlue™ before the vehicle will start. However, it is not uncommon for some makes and models to require a full tank of AdBlue™, and some vehicles may also need the system purged and reset.If you fill your AdBlue tank with anything other than AdBlue, you run the risk of. Your car not starting after several stops. Expensive repairs that are not covered by the warranty, as the catalyst and SCR system are very sensitive when AdBlue is not used.The AdBlue tank is separate from the fuel tank, so it takes up extra space. If the AdBlue fluid is exhausted, the gas emission of the vehicle will increase and the engine locks and the vehicle does not allow it to run. You need to call the hammer. It can lead to both time and cost losses.It’s impossible to drive without AdBlue® – your engine will not start, and you’ll see a notification noting ‘AdBlue® is empty’. A notification will also appear when your AdBlue® tank is running low. Most diesel vehicles require an AdBlue® top-up every 3,000-4,000 miles, depending on the engine.
What can be used instead of AdBlue?
All AdBlue products meet specific standards, so it is essential that you do not use any other products as they could damage your vehicles SCR (Selective Catalytic Reduction) system resulting in expensive repairs and warranty violations. There are two major AdBlue ingredients that make up the liquid. AdBlue is a colourless liquid made from a mixture of high-purity urea (32. The solution poses little risk to humans or the environment as it is mostly water-based.No, you cannot use urine as a substitute for AdBlue. Even though AdBlue contains urea like urine does, the urea in AdBlue is of a much higher grade and purity, and is combined with deionised water. Using urine can harm your vehicle’s SCR system.A urea solution (reagent) registered under the brand name AdBlue is used to achieve Euro 6 exhaust emission limits for diesel engines. The solution starts to freeze at -11°C. At very low temperatures, the exhaust‑cleaning system is prone to failure and this can lead to costly repairs.Even before engine damage occurs, using water instead of AdBlue® will also increase fuel consumption and cause your vehicle to break emissions reduction rules. As such, if you do mistakenly use water instead of AdBlue®, do not start your engine and contact a professional.AdBlue plays a vital role in reducing emissions and keeping your diesel engines compliant, so if your car needs AdBlue, it probably won’t start without it.
Can I make my own AdBlue?
It is possible to produce liquid urea solution yourself if it proves profitable in view of the required quantities you will use. If your monthly consumption of urea solution amounts to more than 30-40 cubic meters, then it is worth exploring. While technically possible, making DEF fluid at home is not recommended due to the precision required in the urea-to-water ratio and the necessity of deionized water to avoid contaminants.Myth 1: You Can Substitute Water or Other Materials for DEF. This is completely false. DEF consists of a precise mixture of urea and deionized water that must meet ISO standards to function properly. Using any substitute will damage your SCR system and void your vehicle warranty.No, DEF is a very pure solution of high grade Urea and demineralized or deionized water.Producing DEF fluid involves carefully mixing urea with deionized water. The ratio is crucial, typically around 32. American Petroleum Institute’s standards.
What urine is AdBlue made from?
FACT: Many people believe that the urea in AdBlue® is made of pig urine. It isn’t! The urea used to make AdBlue® is a man-made solution. Automotive Grade Urea used to manufacture AdBlue® is produced from natural gas. The price of natural gas is presently at a record high globally. Low gas inventories and increased demand from outside Europe combined with reduced imports means that the cost of producing urea is extremely high.Urea Production: Urea, a key component of AdBlue®, is typically manufactured by synthetically combining ammonia and carbon dioxide. This process involves the reaction of ammonia with carbon dioxide under controlled temperature and pressure conditions.What is the composition of AdBlue? AdBlue is an aqueous solution with a mass concentration of 32. In order to produce 1 ton of product, the AdBlue production line must introduce 325 kg of urea for 675 kg of demineralized water. For a better-quality product, the water must be as pure as possible.High Gas Prices Natural gas is a key component in the production of urea, which is then used to manufacture AdBlue. As natural gas costs rise, it directly impacts the cost of production for AdBlue, leading to higher prices.